NDE650

Parts associated with NDE650

• 02-0929-23 — Water Seal
• 02-1205-16 — Faucet
• 02-1205-17 — Faucet
• 02-1205-19 — Faucet
• 02-1810-00 — Knob * Use began 4/97. Only works with 12-2677 type
• 02-1971-00 — Bracket
• 02-2128-01 — Carb. Manifold Assy
• 02-2814-07 — Clamp
• 02-2814-08 — Clamp
• 02-2930-04 — Ice Chute Cover
• 02-2943-01 — Ice Chute Body
• 02-2944-01 — Sink, brown
• 02-2944-20 — Sink, brown. Use gray.
• 02-2950-01 — Arm Clamp 18* A37267-001 NDE650 Bin vane (w/#17)
• 02-2951-01 — Grill
• 02-2977-01 — Lip Seal
• 02-2978-01 — Lip Seal
• 02-3001-01 — Ice Sweep
• 02-3022-01 — Spring
• 02-3128-20 — Breaker Cover
• 02-3167-01 — Glass Filler Lever A37268-001 NDE550 Bin vane (w/#17)
• 02-3266-01 — Reservoir Assy, complete
• 02-3266-02 — Float valve
• 02-3266-03 — Plunger/seat
• 02-3268-01 — Drain tube clip holder
• 02-3319-02 — Dryer
• 02-3327-01 — Bearing
• 02-3359-01 — Fan motor bracket
• 02-3692-01 — Drain Casting
• 02-3837-01 — Drip Pan
• 02-4358-01 — Insulation
• 02-4663-01 — Water Shed
• 03-0255-00 — Wing Nut 13a 12-0675-25 Fan blade, pt of
• 03-1403-36 — Screw
• 03-1405-17 — Screw - Hex cap
• 03-1405-52 — Hex Cap Screw
• 03-1406-09 — Hex nut
• 03-1406-10 — Hex nut
• 03-1408-26 — Washer
• 03-1410-03 — Lock washer
• 03-1419-16 — Panel screw A34393-001 Up front panel, stainless
• 03-1420-03 — Screw
• 03-1544-08 — Soc. Head Screw
• 03-1645-01 — Screw
• 08-0660-01 — Auger Stud
• 11-0447-20 — Low Pressure Cont.
• 11-0485-22 — Hi Press. Cut Out
• 11-0488-21 — Thermo Expansion Valve
• 11-0608-21 — Water Reg. Valve
• 12-0675-25 — Fan blade, pt of
• 12-0813-03 — Terminal Strip
• 12-1213-10 — Bushing
• 12-1213-12 — Bushing
• 12-1646-01 — Solenoid Assembly (115v)
• 12-1646-06 — Solenoid (230v)
• 12-1809-00 — Transformer
• 12-2285-21 — Transformer, 115v
• 12-2285-22 — Transformer, 230v
• 12-2337-05 — Plug Assembly, Circuit
• 12-2340-01 — Plug Assembly, Circuit
• 12-2350-01 — Standoff
• 12-2391-01 — Lockswitch for -1AG
• 12-2409-01 — Microswitch
• 12-2430-21 — Drive Motor
• 12-2430-22 — Drive motor, 230v
• 12-2430-24 — Centrifugal Switch, Emerson
• 12-2430-29 — Rotor Bearing, Emerson
• 12-2430-44 — Start switch, GE split phase
• 12-2430-49 — Rotor bearing, GE split phase
• 12-2469-02 — Contactor, 230v
• 12-2469-03 — Contactor, 115v
• 12-2637-01 — Switch
• 12-2677-21 — Bin Drive Motor (115v)
• 12-2677-26 — Bin Drive Motor (230v)
• 13-0079-01 — Bin Drain Tube, req. 15'
• 13-0079-03 — Tubing, requires 4.5'
• 13-0617-45 — O-Ring
• 13-0617-52 — O-Ring
• 13-0617-54 — O-Ring
• 13-0674-01 — Drain tube, 6.5' req.
• 13-0674-06 — Drain Tube, req. 23'
• 13-0704-00 — Drip Pan Gasket
• 13-0747-00 — Water Shed
• 13-0840-01 — Plug
• 13-0866-01 — Grommet, Bin Control
• 13-0871-01 — Water Shed
• 15-0672-01 — Ice & Water label
• 15-0684-01 — Ice Decal
• 15-0808-01 — Emblem
• 16-0162-00 — Strainer
• 16-0670-01 — Tee
• 16-0670-04 — Tee
• 16-0832-02 — Stem cap
• 16-0832-20 — Access valve
• 18-0422-00 — Fan bracket stand type
• 18-1901-49 — Start Capacitor, 115v
• 18-1902-52 — Run capacitor, 115v
• 18-1903-44 — Potential Relay, 115v
• 18-1903-48 — Current Relay, 230v
• 18-2200-27 — Mounting Sleeve
• 18-2200-28 — Mounting Grommet
• 18-2200-35 — Start capacitor, 230v.
• 18-2200-38 — Cap for start capacitor
• 18-2200-39 — Start Cap. Bracket
• 18-3305-25 — Condenser
• 18-5700-50 — Overload for 115v comp.
• 18-5700-55 — Overload for 230v comp.
• 18-8720-21 — Compressor, 115v
• 18-8720-26 — Compressor, 230v
• 18-8731-01 — Condenser
• 18-8736-02 — Fan Motor, 115v
• 18-8736-03 — Fan motor, 230v
• 18-8738-01 — Fan Blade
• 19-0599-06 — Insulation