NME454

View Parts Breakdown

Looking to buy a new ice machine

to replace this model? Request a Quote →

Parts associated with NME454

02-0836-00 — Catch
02-0929-23 — Water Seal
02-1338-00 — Hose clamp
02-2378-02 — will longer be used for production or as a service part.
02-2916-01 — Slotted collar
02-2929-03 — Ice Chute Lower
02-2930-04 — Ice Chute Cover
02-2976-01 — Air Filter 16. A35890-020 Base
02-2977-01 — Lip Seal
02-2978-01 — Lip Seal
02-3001-01 — Ice Sweep
02-3128-20 — Breaker Cover
02-3266-01 — Reservoir & valve, incl 5,6
02-3266-02 — Float valve
02-3266-03 — Plunger/seat
02-3319-02 — Dryer
02-3559-01 — is a needle that snaps onto a standard grease gun fitting. Use it to insert and deeply
02-3692-22 — Drain fitting
02-3826-03 — Res. overflow hose
02-3837-01 — Drip Pan
02-3841-01 — Ice Chute Body w/ins*
02-4358-01 — Insulation wrap
02-4663-01 — Water Shed
03-0271-00 — Speed Clip 03-1406-04 Nut
03-0571-02 — Screw
03-1394-01 — Pal Nut
03-1403-14 — Screw
03-1404-12 — Screw
03-1405-20 — Cap Screw
03-1405-41 — Cap Screw
03-1405-52 — Hex Cap Screw
03-1406-04 — Nut
03-1407-07 — Washer
03-1419-22 — Screw
03-1531-01 — Screw
03-1544-08 — Soc. Head Screw
03-1645-01 — Screw used after 5/05
03-1660-01 — Filter clip
08-0660-01 — Auger Stud
11-0488-21 — TXV for all but 454
11-0488-22 — TXV for NME454, FME504
11-0501-22 — Hi Pressure Cut Out
11-0502-21 — Low pressure cut out switch
11-0608-21 — Water Reg. Valve
12-2430-21 — Drive Motor 115v/60Hz
12-2430-22 — Drive motor 230v/50-60Hz
12-2430-24 — Start switch, Emerson
12-2430-29 — Rotor Bearing, Emerson
12-2430-44 — Start switch, GE split phase
12-2430-49 — Rotor bearing, GE split phase
12-2760-21 — Water Level Sensor
13-0617-45 — O-Ring
13-0617-49 — O-Ring
13-0617-52 — O-Ring
13-0617-54 — O-Ring
13-0704-00 — Gasket
13-0840-01 — Rubber cap
13-0871-01 — Water Shed
13-0895-01 — Inlet tubing
13-0929-01 — Insulation donut*
13-0929-02 — Insulation donut*
15-0411-00 — Strike
15-0808-01 — Emblem
16-0832-02 — Stem cap
16-0832-03 — Core cap
16-0832-20 — Access valve
16-0835-01 — Water Inlet Fitting
16-1039-01 — Male connector
16-1137-01 — Access valve body
16-1139-01 — Core
16-1140-01 — Cap
17-2702-01 — SWITCH
18-2200-27 — Sleeve
18-2200-28 — Grommet
18-3306-25 — Condenser for A series
18-8711-50 — Overload for the above
18-8721-21 — Compressor 115v/60 Hz
18-8721-22 — Compressor 230v/50 Hz
18-8721-23 — Compressor for 208-230/60
18-8721-50 — Overload for
18-8721-51 — Overload for the above
18-8734-01 — Condenser
18-8736-01 — Fan motor, 115v/60 Hz
18-8736-04 — Fan motor, 230v/50 Hz
18-8747-01 — Fan blade
18-8871-21 — Condenser for B series
18-8929-21 — Compressor, 454
18-8929-23 — Overload for the above
19-0599-06 — Insulation