NME654
Find Parts for NME654
Browse OEM replacement parts for the NME654 ice machine and use the parts diagram below to identify the correct component before ordering.
Parts associated with NME654
- 02-0836-00 — Catch
- 02-0929-23 — Water Seal
- 02-1338-00 — Hose clamp
- 02-2378-02 — will longer be used for production or as a service part.
- 02-2916-01 — Slotted collar
- 02-2929-03 — Ice Chute Lower
- 02-2930-04 — Ice Chute Cover
- 02-2976-01 — Air Filter 16. A35890-020 Base
- 02-2977-01 — Lip Seal
- 02-2978-01 — Lip Seal
- 02-3001-01 — Ice Sweep
- 02-3128-20 — Breaker Cover
- 02-3266-01 — Reservoir & valve, incl 5,6
- 02-3266-02 — Float valve
- 02-3266-03 — Plunger/seat
- 02-3319-02 — Dryer
- 02-3559-01 — is a needle that snaps onto a standard grease gun fitting. Use it to insert and deeply
- 02-3692-22 — Drain fitting
- 02-3826-03 — Res. overflow hose
- 02-3837-01 — Drip Pan
- 02-3841-01 — Ice Chute Body w/ins*
- 02-4358-01 — Insulation wrap
- 02-4663-01 — Water Shed
- 03-0271-00 — Speed Clip 03-1406-04 Nut
- 03-0571-02 — Screw
- 03-1394-01 — Pal Nut
- 03-1403-14 — Screw
- 03-1404-12 — Screw
- 03-1405-20 — Cap Screw
- 03-1405-41 — Cap Screw
- 03-1405-52 — Hex Cap Screw
- 03-1406-04 — Nut
- 03-1407-07 — Washer
- 03-1419-22 — Screw
- 03-1531-01 — Screw
- 03-1544-08 — Soc. Head Screw
- 03-1645-01 — Screw used after 5/05
- 03-1660-01 — Filter clip
- 08-0660-01 — Auger Stud
- 11-0488-21 — TXV for all but 454
- 11-0488-22 — TXV for NME454, FME504
- 11-0501-22 — Hi Pressure Cut Out
- 11-0502-21 — Low pressure cut out switch
- 11-0608-21 — Water Reg. Valve
- 12-2430-21 — Drive Motor 115v/60Hz
- 12-2430-22 — Drive motor 230v/50-60Hz
- 12-2430-24 — Start switch, Emerson
- 12-2430-29 — Rotor Bearing, Emerson
- 12-2430-44 — Start switch, GE split phase
- 12-2430-49 — Rotor bearing, GE split phase
- 12-2760-21 — Water Level Sensor
- 13-0617-45 — O-Ring
- 13-0617-49 — O-Ring
- 13-0617-52 — O-Ring
- 13-0617-54 — O-Ring
- 13-0704-00 — Gasket
- 13-0840-01 — Rubber cap
- 13-0871-01 — Water Shed
- 13-0895-01 — Inlet tubing
- 13-0929-01 — Insulation donut*
- 13-0929-02 — Insulation donut*
- 15-0411-00 — Strike
- 15-0808-01 — Emblem
- 16-0832-02 — Stem cap
- 16-0832-03 — Core cap
- 16-0832-20 — Access valve
- 16-0835-01 — Water Inlet Fitting
- 16-1039-01 — Male connector
- 16-1137-01 — Access valve body
- 16-1139-01 — Core
- 16-1140-01 — Cap
- 17-2702-01 — SWITCH
- 18-2200-27 — Sleeve
- 18-2200-28 — Grommet
- 18-3306-25 — Condenser for A series
- 18-8711-50 — Overload for the above
- 18-8721-21 — Compressor 115v/60 Hz
- 18-8721-22 — Compressor 230v/50 Hz
- 18-8721-23 — Compressor for 208-230/60
- 18-8721-50 — Overload for
- 18-8721-51 — Overload for the above
- 18-8734-01 — Condenser
- 18-8736-01 — Fan motor, 115v/60 Hz
- 18-8736-04 — Fan motor, 230v/50 Hz
- 18-8747-01 — Fan blade
- 18-8871-21 — Condenser for B series
- 18-8929-21 — Compressor, 454
- 18-8929-23 — Overload for the above
- 19-0599-06 — Insulation
Shop NME654 Parts
About NME654 Ice Machine Parts
We carry OEM parts for the NME654 ice machine to help you repair, maintain, and extend the life of your equipment. Use the parts breakdown PDF above to identify the correct component and match it to the products listed on this page.
Popular replacement items may include pumps, valves, sensors, motors, and control components, depending on the machine configuration. Ordering the correct OEM part helps reduce downtime and improves long-term reliability.